PDA

View Full Version : CXRacing Duel Core FMIC any feedback?



Patryn
03-28-2013, 01:32 PM
Anyone that has installed the duel core CXRacing FMIC; do you have any feebback on it? I'm most interested if it it had any affect on pressure pulsing if anyone had those symptoms before the install.

TurboSinceBirth
03-28-2013, 04:28 PM
Anyone that has installed the duel core CXRacing FMIC; do you have any feebback on it? I'm most interested if it it had any affect on pressure pulsing if anyone had those symptoms before the install.

I'm pretty sure that if you end of having problems with pressure pulsing you need to swap to a different turbo because in the lower rpms due to the quick spool the turbo is outflowing the demand of the engine thus riding along the left most edge of the compressor map or beyond where the turbo itself surges because it's outside its design parameters.

Patryn
03-28-2013, 04:33 PM
I'm running MHI Big 16G turbos.

TurboSinceBirth
03-28-2013, 05:04 PM
I'm running MHI Big 16G turbos.

You shouldn't have any problems then. It seems like mostly TD04 cars have issues. Here's a map for 16G turbos albeit not the EVO3s.

http://stealth316.com/images/td05h-16glarge-jlspec.gif

You can see that you'll never be able to generate enough boost in the 4k rpm and under regions for the turbo to surge.

Patryn
03-28-2013, 05:24 PM
It's the pressure pulsing that people get at low load cruise when the boost is at or near 0 PSI. Heavier load like going up a hill will make it much more noticeable. When I switched to stock SMIC's I noticed the problem went away. With the current CXRacing single core FMIC the problem is getting very annoying. Curious if the duel core might eliminate this issue.