PDA

View Full Version : Help me pick wheels!



HLxDrummer
03-26-2013, 05:43 PM
Alright guys I've got it narrowed down to a few. I really like the RP03 from Enkei but they are a little expensive for me so I basically ruled them out.

Evo IX wheels. Half inch narrower, but I can ditch the spacers I am running now and still run a 245 tire. Cheap, look good, and lightweight.

Evo MR wheels. Half inch narrower, but I can ditch the spacers/run 245 still. Kind of pricey but they are forged, look good and are light.

FN01R-C (17X9). Half inch wider, but I have to keep the spacer and I think running anything bigger than a 245 will rub my Megans (since the wheel is increasing the tire's section width). Same price as the MR wheels but not forged. Look pretty good and are fairly light.

I would love to run something like a 265 on a lightweight wheel (FN01R-C would be perfect), but I don't think I can swing it with the Megans..

Also keep in mind I am going from all season 245s on stock wheels to summer tires so if I can still run a 245 there will be a big handling difference still.

95gto
03-26-2013, 06:07 PM
I must be missing something with your setup. I run FN01RC's (17x9) with 255's, K-Sports, and no spacers and don't have any clearance issues. 245's on those rims is too narrow imo as the tire tries to pull away from the lip.

HLxDrummer
03-26-2013, 06:15 PM
Ya I thought it was weird I needed spacers for stock wheels/tires..

I do have the bottom of the suspension pulled all the way out (negative camber) so if I hit a bump it is already maxed out. Did you do the opposite? Even if I did that I can't imagine having enough room..

Did you preload your springs much? Does your lower perch sit above the tire?

anyonebutme
03-26-2013, 08:58 PM
you go max POSITIVE camber on the lower camber bolt.....then add what you need using the strut top. That maximizes strut clearance.

I have a set of Black Racing Pro N1's in 18x9, shipping wheels kinda sucks though.

HLxDrummer
03-26-2013, 09:52 PM
I know that would give me more clearance but I heard about the adjustment slipping down there and the tires getting chewed by the coilovers which I am trying to avoid. I know it is probably rare but I'll be really pissed if I have to replace four tires because that adjustment slipped on a bump lol

Is that the only way to make wider wheels fit?

R/T93
03-26-2013, 10:04 PM
More offset... I run +30 offset and 275's (10.4" section width) and there is A LOT of room between the coil overs front and rear. I reckon I could fit 295's on the same wheel.

Tensecs2fame
03-26-2013, 10:13 PM
Forgestar F-14 1400$ ish. 18x9.5 in any offset.

http://www.benzboost.com/images/imported/2011/01/1602.jpg

Weight is on a 19x8.5

anyonebutme
03-26-2013, 10:15 PM
I know that would give me more clearance but I heard about the adjustment slipping down there and the tires getting chewed by the coilovers which I am trying to avoid. I know it is probably rare but I'll be really pissed if I have to replace four tires because that adjustment slipped on a bump lol

Is that the only way to make wider wheels fit?


take a few washers, weld a little nipple on one side to fit into the slot, BOOM, not possible to slip anymore.

HLxDrummer
03-27-2013, 11:04 AM
More offset... I run +30 offset and 275's (10.4" section width) and there is A LOT of room between the coil overs front and rear. I reckon I could fit 295's on the same wheel.

Do your tires/wheels stick out from the fenders at all? I calculated that with the FN01R-C 17X9 +35 it would stick out ~2CM more than stock, but I don't remember how flush (or not flush) my setup is now. I would imagine +30 would let me run 255 at least..

Does the lower spring perch on the Tiens sit next to the tire?


Forgestar F-14 1400$ ish. 18x9.5 in any offset.

http://www.benzboost.com/images/imported/2011/01/1602.jpg

Weight is on a 19x8.5

Little expensive for me, but thanks!


take a few washers, weld a little nipple on one side to fit into the slot, BOOM, not possible to slip anymore.

Hm.. I'll have to look into that. Thanks!

R/T93
03-27-2013, 11:42 AM
My front with about 2 deg of neg camber.

http://i28.photobucket.com/albums/c201/Ultor2/20130207_164248_zps6665b593.jpg

Rear has like an inch more. This is rested while on the ground.

This is how much it sticks out with no camber...
http://i28.photobucket.com/albums/c201/Ultor2/20130207_171546_zps137c5d25.jpg

Its flush with a couple degrees.

From the phone.

Prime12
03-27-2013, 12:58 PM
I thought you were interested in autox? I wouldn't go any narrower than stock. For autox / road course, our cars are horribly under-tired for 3700+lbs beasts they are. Don't make it any worse.

R/T93
03-27-2013, 02:48 PM
Odd that the Fno1r-c's didn't work for you. I have run them with 275/40/17 Hoosiers on 1st and 2nd gen TT brakes with no problems. I also know 275/40/17 nitto nt01's on +35 17x10 fnorks fit even stock struts.

From the phone.

HLxDrummer
03-27-2013, 04:32 PM
I thought you were interested in autox? I wouldn't go any narrower than stock. For autox / road course, our cars are horribly under-tired for 3700+lbs beasts they are. Don't make it any worse.

Ya I am interested in autocross and would like to go road racing someday. That is why I want a lighter wheel and want a second set of rims so I can get dedicated summer tires (all I have ever run are all seasons). Figured a 0.5" smaller wheel (and lighter) with a summer tire would be better than stock width and all seasons. BUT if I can go wider, by all means I want to - just don't know how.


Odd that the Fno1r-c's didn't work for you. I have run them with 275/40/17 Hoosiers on 1st and 2nd gen TT brakes with no problems. I also know 275/40/17 nitto nt01's on +35 17x10 fnorks fit even stock struts.

From the phone.

Are you talking about me? I haven't actually tried them just ran them through a calculator online. With stock wheels and tire size I had to run a spacer (10MM). I have a little room now with the spacer but I don't remember how much (I am at school and car is at home). Theoretically if I got a 17X9 +30 I would get 10MM extra inside clearance, just enough to lose the spacer (not accounting for the wider tire). This is with the bottom adjustment at max negative camber as I mentioned.

I feel like either I am messing up the calculations or something is weird on my car..

Thank you for those pictures. I am guessing the Tiens and Megans are similar in dimensions.. Looks like I need less offset! You have 16MM less and you increased your tire by 15MM on each side so that makes sense on stock suspension at least. I actually have LESS room with the Megans than I did stock though (wasn't expecting that).

PS What do you think of those mustang wheels you have? Seems like they are a few pounds heavier than other options but I think they look great and it seems like they would fit. Price for those and some tires isn't too bad..

R/T93
03-27-2013, 08:37 PM
The AMR's have been great. I have tracked them for about 800 miles and DD'd for 20k with no issues in one year since I have had them. They still clean up very good considering I have high perf. Brakes that dust a lot. They are heavy but they are cheaper than anything on the market with that style and while I wasn't "looking" for a cheap wheel I was glad I found these. I'm about to buy another set, lol.

From the phone.

HLxDrummer
03-27-2013, 08:53 PM
Good to hear! Now if only they came in 17" so I could save some money on tires lol

95gto
03-28-2013, 10:25 AM
Ya I thought it was weird I needed spacers for stock wheels/tires..

I do have the bottom of the suspension pulled all the way out (negative camber) so if I hit a bump it is already maxed out. Did you do the opposite? Even if I did that I can't imagine having enough room..

Did you preload your springs much? Does your lower perch sit above the tire?


you go max POSITIVE camber on the lower camber bolt.....then add what you need using the strut top. That maximizes strut clearance.

I have a set of Black Racing Pro N1's in 18x9, shipping wheels kinda sucks though.

I increased spring pre-load some but nothing substantial. I will have to look at my setup to see where the lower perch sits but based on my ride height I would wager that is has to be well below the tire.

Chris has the correct idea on the strut to knuckle mounting, I pulled the strut to the back of the knuckle before tightening it. I have been driving on these coilovers for a few years now with occassional race use and have had zero issues with the knuckle walking on the strut. Cartridge and pillowball life on these Ksports is a different story.