PDA

View Full Version : Carbotech pads and rotor wear.



Toni
03-22-2013, 02:10 PM
So my rotors are worn out real good. I'm curious if what I am seeing is normal wear or if something is either wrong or the rotors were shit to begin with. The rotors were brand new a couple years ago. I've run two sets of pads on them. Carbotech AX6s were run for about 70% of the pad and was mainly street driving and a few runs of the Tail of the Dragon. Then last summer I put on XP8s before the NG for the road course and autocross. I left them on through the rest of the summer and they are about 50% worn now.

The rotors are worn really well. The lip is 2.5mm deep on both sides. According to manual they are way out of spec.

Performance pad users/Autocross and roadcourse guys, is this normal? Terry, have you seen similar results?

https://dl.dropbox.com/u/29716828/rt/rotor_01.jpg

https://dl.dropbox.com/u/29716828/rt/rotor_02.jpg

Thanks!

bridge
03-22-2013, 02:26 PM
I usually go through the front rotors (napa brand) with xp8/xp10s on 2 full days at RA.

R/T93
03-22-2013, 02:33 PM
I was wearing out stock rotors FAST. A new set of DBA 4000's with ax6s wore down to where you are at in 3 track days anf 10k street miles.

Even when I went with the SCE 35mm wide rotors I was still having the same problem. Went through 1.5 sets of those at $220 a rotor :/ with xp8s. I had a set of slotted SCE rotors that became blanks in 3 track days, wore down past the slots.

I had hawk hps pads in the rear and they were hardened and I dony think they did anything so I was all front brakes, lol.

These were the symptoms for overheating the rotors. Massively accelerated wear on the rotor and pad. Mind you, I never once experienced brake fade of any kind ever through all these problems. The carbotechs simply won't fade, even at 1300+ f, just wear out parts really quickly.

I bought the MR front brake deflectors from Hans and they have proved to be effective at reducing temperatures in the many hundreds of degrees (3-400 in some street testing I did, and much more agreeable temps on the road course).

Since then, though, I got the 14" XYZ kit from ABM's group buy and haven't looked back. Rotor and pad wear are a third or less what they used to be and I am on their street pad. ABM has a p/n for carbotech pads for these calipers as well so you can get your favorite pad for them, too.

Our cars simply need a larger 2 pc heat sink for tracking, IMO I was always worried of stress cracks and was blowing dust boots every track day. No more with the 14" brakes. The MR deflectors help even more. I talked to J. Fast about some rear deflectors and I will get them if he makes them.

Hope all this has your answer.

From the phone.

Jimvr4
03-22-2013, 02:51 PM
Great info Nate

B-Man
03-22-2013, 03:15 PM
I saw the same after two years (2 road courses and half a dozen autox) on my last pair of rotors on Hawks and XP8s

Toni
03-22-2013, 03:27 PM
Which rotors?

B-Man
03-22-2013, 03:34 PM
Whatever IPS sells for their slotted rotors.

anyonebutme
03-22-2013, 03:48 PM
wow guys.

http://img.photobucket.com/albums/v55/PrestoTuna/2012-06-16231344.jpg

http://img.photobucket.com/albums/v55/PrestoTuna/forum%20misc/IMG_20130322_133529_394_zpsaf25363c.jpg

My rotors, over 2 years on XP10s. barely any wear. I'm not quite as heavy as I once was, lol. A couple BMW racers told me that Carbotech overrates their pads, when you think you need XP8, get XP10, ect. I'm also quite gentle on my brakes when on track, relying more on using the tires to scrub entry speed than hammering the brakes, overslowing, and accelerating through the turn. Cooling also is a major factor.

B-Man
03-22-2013, 03:52 PM
wow guys.

http://img.photobucket.com/albums/v55/PrestoTuna/2012-06-16231344.jpg

http://img.photobucket.com/albums/v55/PrestoTuna/forum%20misc/IMG_20130322_133529_394_zpsaf25363c.jpg

My rotors, over 2 years on XP10s. barely any wear. I'm not quite as heavy as I once was, lol. A couple BMW racers told me that Carbotech overrates their pads, when you think you need XP8, get XP10, ect. I'm also quite gentle on my brakes when on track, relying more on using the tires to scrub entry speed than hammering the brakes, overslowing, and accelerating through the turn. Cooling also is a major factor.

You're the only one who's replied so far with 2g brakes :lo5l:

anyonebutme
03-22-2013, 03:55 PM
Nate had 2G brakes, lol

B-Man
03-22-2013, 03:56 PM
Damnit, bested me again.

R/T93
03-22-2013, 04:26 PM
If only everyone had a 3100 lb turbo car like abm..... I'm jelly

From the phone.