PDA

View Full Version : Drag Racing First time with the VR-4 at the Track



VR-4 0wnz j00
03-09-2013, 08:51 AM
I finally was able to take my car to the track. Im basically BPU @14psi. I have never launched my car before I hit the track so the first 3 tries were terrible. I clicked off a 14.3@103 and a 14.0@105. My next one, I launched hard and spun so I aborted. My last 2 runs I figured it out and ran 13.15@105.88.

5048


http://www.youtube.com/watch?v=BsliARAIhbQ

keo92stealth
03-09-2013, 09:26 AM
13.1 ain't bad at all for a bpu car . Damn dude . U probably could have ran a 12 if you got a better 60 foot .

stealthee
03-09-2013, 10:53 AM
A 1.8 60' would have put you solidly into the 12's.

VR-4 0wnz j00
03-09-2013, 12:32 PM
Yeah, I didnt figure out how to launch until it got into the 40's. The first time I tried the dousche in front of me drove through the water pit and I lit up all 4.

Jimvr4
03-09-2013, 06:09 PM
I used to run mid 13s on the heavier Spyder with 1.0 bar on stock injectors and after 12 years my motor has blown. My advice to you is upgrade your injectors and get a fuel controller.