PDA

View Full Version : Knock sensor



x2xtreme360
09-27-2010, 12:13 AM
Not even sure why I'm posting this... I know the answer.

http://i89.photobucket.com/albums/k226/X2Xtreme360/knock.jpg

I guess I am posting this to ask one question... is this going to mess up my timing advance? I can deal without a knock sensor for right now... but I'm taking the car to the track this weekend and really don't want my timing to retard. I know I'm not really knocking.

How much does a used sensor go for? I still need to do some diagnostics before I buy one, but I might as well start inquiring now.

kywhitelightning
09-27-2010, 02:10 AM
Yes it will mess with the advance. For approximately every 3 counts of knock my logger sees the car pulls 1 degree. This may differ from car to car but it's what I have noticed on my car. Good luck at the track.

Jeff

x2xtreme360
09-27-2010, 11:37 AM
Yes it will mess with the advance. For approximately every 3 counts of knock my logger sees the car pulls 1 degree. This may differ from car to car but it's what I have noticed on my car. Good luck at the track.

Jeff

You're right. I'm seeing timing reduce to a mere 2 degrees at WOT now.

Wow, this sucks. Everything that has NEVER gone wrong with my car is happening this week. ARGGHH.

blindmist
09-27-2010, 01:50 PM
Get it fixed. It's simple and relatively easy. Just pull the intake plenum, and then the lower intake manifold, and there it is. You probably know this, but just for reference.

x2xtreme360
09-27-2010, 04:01 PM
Get it fixed. It's simple and relatively easy. Just pull the intake plenum, and then the lower intake manifold, and there it is. You probably know this, but just for reference.

oh yea... no big deal on replacing the sensor. I feel like I'm down there once a week, lol.

Problem is that I am going to the track this weekend. It's OK though... I think I found one kind of close to me.

Still need to do some testing with the meter to make sure it's the sensor.

Austin@STM
09-27-2010, 04:23 PM
oh yea... no big deal on replacing the sensor. I feel like I'm down there once a week, lol.

Problem is that I am going to the track this weekend. It's OK though... I think I found one kind of close to me.

Still need to do some testing with the meter to make sure it's the sensor.

If you want a brand new one we can get it to you by the weekend. It would be $105 shipped.

blindmist
09-27-2010, 09:15 PM
oh yea... no big deal on replacing the sensor. I feel like I'm down there once a week, lol.

Problem is that I am going to the track this weekend. It's OK though... I think I found one kind of close to me.

Still need to do some testing with the meter to make sure it's the sensor.

I would say 99% chance its the sensor and not wiring. I am just trying to diminish your hopes so that when you find out it is the sensor and not the wiring you won't be so upset. :)

x2xtreme360
09-28-2010, 12:10 AM
I would say 99% chance its the sensor and not wiring. I am just trying to diminish your hopes so that when you find out it is the sensor and not the wiring you won't be so upset. :)

lol yea but the wiring check is free since I know my way around a multimeter;)

I just picked one up from a local member so it should be installed by the end of this week.

Austin@STM
09-28-2010, 02:03 AM
lol yea but the wiring check is free since I know my way around a multimeter;)

I just picked one up from a local member so it should be installed by the end of this week.

Awesome, now get it ready for the track and post some times!

BTW what track you going to with it?

x2xtreme360
09-28-2010, 10:53 AM
Awesome, now get it ready for the track and post some times!

BTW what track you going to with it?

I'm actually going to the Glen this weekend. I'm not sure if they actually time the laps because it's a road course class... but it's pedal to the metal all day long.

Oh, and I just found out what my wobbling noise was... bad wheel bearing:rolleyes: what a week.

Austin@STM
09-28-2010, 11:10 AM
Ouch, well better now than at the track.

x2xtreme360
09-28-2010, 06:33 PM
To all you neh sayers, it actually was an issue with the wiring after all:p

I'm not going to say 100% until my laptop charges and I can go out and do a log, but I'm 99.9% sure.

Here's what happened. I had an epidemic over the weekend in which I had to tear the top half of my engine apart. Well, once it was back together and I went to plug the connector back in on the plenum, the harness actually pushed one of the contacts out of the other side of the harness because they didn't line up right apparently. I just saw this as I got home and saw one of the contacts out of the harness. This would explain why I get 0 counts of knock until I hit WOT... the contact was still touching the other part of the harness, but once the engine shifts from the torque, it pulled it away from it, causing the constant 8-9 reading.

I'm kind of happy about it.

blindmist
09-28-2010, 06:35 PM
you cunt. i hate you.

with love

:)

x2xtreme360
09-28-2010, 06:50 PM
Just did a log.

I didn't even have to do a log... I knew right away that I got my timing back. Felt so much better.

One less thing I have to do before this weekend:)

blindmist
09-29-2010, 02:48 AM
Just did a log.

I didn't even have to do a log... I knew right away that I got my timing back. Felt so much better.

One less thing I have to do before this weekend:)


Look at this guy. Brag brag brag.