Evoscan logs, wrong data in columns

[iceorphen]

When logging w/ the lcdbc and evoscan (mmc 1g/2g with gregs settings copied to the xml) the evoscan logs have info in the wrong columns. Im unsure if its because of the lcdbc or evoscan.

When logging directly via ecu (mitsubishi mutIII, gregs 3000gt settings).. the data is fine. this is a link to a log with the problem

https://docs.google.com/spreadsheet/...kRoVFNZQVZsREE

any ideas?

[BlackStealth]

In EVOSCAN v2.9, there's an option called Select ECU. To use Greg's XML, it must read EFI 3000GT. So select that in MUT2 mode, and then switch to MMC 1g/2g so the EFI 3000GT sticks.

[iceorphen]

I was wondering if it would stick when switching from mut to mmc :) ill try it out tomorrow
thanks again :D

[iceorphen]

update: This does work, lets me log using greg's xml under mmc 1g/2g. thanks again :)

[GTWHOA]

In EVOSCAN v2.9, there's an option called Select ECU. To use Greg's XML, it must read EFI 3000GT. So select that in MUT2 mode, and then switch to MMC 1g/2g so the EFI 3000GT sticks.

I wasn't aware that Greg's XML let you log 1g/2g with 2.9 Awesome! I'd been using 2.5 when logging earlier cars due to connection problems.