View Full Version : More scaled inputs
Greg E
01-07-2013, 02:50 PM
How you guys liking the MAP and wideband scaled inputs?
I'm working on getting 3 or 4 more 5v inputs for data logging purposes. This will give you the ability to read any 5V sensor tapped into the ECU without the need for a gauge. Things like oil pressure/temp, EGTs, Ethanol sensor... All you need is a 5V sensor and its scaling.
CoopKill
01-07-2013, 03:14 PM
Nice. I am a little out before at the point of setting this up, but sounds great.
Oh that's what I can try to get working while it's in the garage. The version I had it wasn't quite working. I'll let you know!
GTWHOA
01-07-2013, 08:19 PM
I was looking at logging fuel pressure with a spare input.
Greg E
01-07-2013, 09:22 PM
I was looking at logging fuel pressure with a spare input.
Same here.
donniekak
01-07-2013, 10:21 PM
If you can log a map, and iat at the same time as rpm, and load, it would make it way easier to come up with a speed density algorithm. Is that in the works?
Greg E
01-07-2013, 10:24 PM
If you can log a map, and iat at the same time as rpm, and load, it would make it way easier to come up with a speed density algorithm. Is that in the works?
Can not say at this time.
I was looking at logging fuel pressure with a spare input.
Same here.
I am currently logging my fuel pressure with the sensor that came with my apexi el2 meters. The trick here is to find a good inexpensive sensor to use. The one that came with my gauges is a NAGANO KEIKI CO., LTD. - KM10. Not sure if it can be sourced separately (outside apexi) and how much they run.
http://apexi-usa.com/shop/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/4/9/49b-a012.jpg
Uniuno
01-09-2013, 06:08 PM
VDO Pressure Senders 360410 - SummitRacing.com (http://www.summitracing.com/parts/vdo-360410)
Decent price, or you could find one from a GM for about 20 bucks. They're everywhere!
anyonebutme
01-10-2013, 09:10 PM
Hey Greg. Say I log FP and boost, is there a way to turn on an output master warning light (check engine light output) if FP does not rise 1:1 with boost outside a set limit?
Greg E
01-10-2013, 09:56 PM
Hey Greg. Say I log FP and boost, is there a way to turn on an output master warning light (check engine light output) if FP does not rise 1:1 with boost outside a set limit?
Yes. Very easy.
dyter
01-15-2013, 09:23 AM
Nice !
(I need to log EGT Temp and Plenum Temp)
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.