gs1000kat
12-18-2012, 09:56 AM
I have a 6 speed with JDM gears, aka MR gears I'm parting out, or will sell whole. It is missing the bell housing though. Accordign to leet(previous owner) JDM gears were installed around 70,000 miles, then put about 30,000 on it
Only listed the major parts. Let me know what you need in detail as I've only ever disassembled cases, never stripped down the input and intermediate shafts. I do have access to a press though.
All prices are plus shipping and somewhat negotiable.
Output shaft - $100
VCU - $300
center case - $200
End case - $100
Transfer case - $250
Sun gear $50
Shift forks
25 spline 5 spd, mileage unknown. Grinds going into second
Bell housing - $150
center case - $100
end case - $75
VCU, bad. Can turn by hand - Good for welding $50
Sun gear - $50
18 spline trans
Bell housing - $50
center case - $50
end case - $50
shift forks - $40 each
6 Spd:
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120744g.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120745.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120745b.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120743b.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120744a.jpg
18 Spline:
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/18%20spline%205%20spd/1213120746.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/18%20spline%205%20spd/1213120746a.jpg
Only listed the major parts. Let me know what you need in detail as I've only ever disassembled cases, never stripped down the input and intermediate shafts. I do have access to a press though.
All prices are plus shipping and somewhat negotiable.
Output shaft - $100
VCU - $300
center case - $200
End case - $100
Transfer case - $250
Sun gear $50
Shift forks
25 spline 5 spd, mileage unknown. Grinds going into second
Bell housing - $150
center case - $100
end case - $75
VCU, bad. Can turn by hand - Good for welding $50
Sun gear - $50
18 spline trans
Bell housing - $50
center case - $50
end case - $50
shift forks - $40 each
6 Spd:
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120744g.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120745.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120745b.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120743b.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/JDM%206%20speed/1213120744a.jpg
18 Spline:
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/18%20spline%205%20spd/1213120746.jpg
http://i14.photobucket.com/albums/a325/fst3000gt_vr4/For%20sale/18%20spline%205%20spd/1213120746a.jpg