Dyno coming up

[GTwizard]

Our Dyno day for the DFW area will be held Dec 8th. If there is anyone here that wishes to come, but is no long on the OTHER forum, you are still invited. Look to to see results of our NA pulls shortly after. We will post the results in this thread. Goal is 275 HP and 275 Ft lbs torque NA. Just have to see what happens I guess. Maybe we can oull it off, Maybe not. Either way, shouild be a blast.
http://i498.photobucket.com/albums/rr343/GTwizard/DSCF6177.jpg
http://i498.photobucket.com/albums/rr343/GTwizard/DSCF6173.jpg

[futurevr4man]

you ever get that bend made so your not doing coupler into coupler?

[Ninja Performance]

good luck! Vids Please!

-Chris

[vroom4]

you ever get that bend made so your not doing coupler into coupler?

Lowes didnt have any 90s left in the wood stove aisle.

[futurevr4man]

i hate when i use the wrong you're...

[GTwizard]

No time to get all the Hard tubes made yet. But the coupler to coupler has a steel ring inside and is hose clamped. Just not in this picture.
Installing and Butt tuning Flashable this week. Will finish tuning on Dyno.
Vroom4 - Do you think that air filter looks like Home depot/Lowes stuff? Really??
It's not. It can flow 600 CFM, Not that I can, but it can. For me, that just ensures I have no restiction in the ram air system.
I happen to like it, and was not building it for you anyways. And if I can find cheap parts at lowes/depot when prototyping and testing.
You bet you ass I will buy that stuff untill project layout is finalized. Not made of money. But would never use that stuff and call a project finished.

[n2nsanity]

Only a few days away. Good luck with it. In for results :)

[GTwizard]

Played a little with the launch control today. OH man, That sh*t is cool. NA's in a BIG way need help in that department.
I never could get off the line with out braking something in less than 3 runs. LOL. Now I can't wait till Feb when the tracks open again.
Not yet tested the "No lift shit". Need an other clutch switch. We will put that in before Dyno if we have time.
I'll try it on the way home. :O

[futurevr4man]

well i hope you get good results, but idk about the coupler into coupler deal. good luck.

[stealthee]

I've actually no lift shifted quite a few times without issue. SOHC's have a 6000 redline and hit revf limit at 6300. I can shift so fast that I start at 6000 and I don't touch the rev limiter before I am back off the clutch.

[GTwizard]

Did our Dyno. The ECU was working awesome, but having issues with the Maft or Translater. You can see that on the chart.
The AFRs are all over the place do to a bouncing Matf signal. No time to Iron it out. Made 3 pulls, 2 Flashes and this is what we are driving home.
It's not quite what I was looking for , but it will do untill I get these other issues worked out. It's fun as hell. The launch control is damn near perfect.
I have never made a good launch untill today. The cool thing thing is, it launches exactly the same everytime. Nothing to do with My skills at all. LOL.
240 wheels HP. and 205 Tq. Revs to over 8000 easily. New red line set for 8000. Got the "no Lift shift" working as well.
Sorry no video that I know of. Could have been one, if so I'll post it. So this is our current, but much improvable package to date.
http://i498.photobucket.com/albums/rr343/GTwizard/dino0001.jpg

[mb3000]

Impressive!

[n2nsanity]

Nice work! Would like to see what that thing can do once the maft issues are worked out.

[thor'svr4]

240hp NA is no joke, congrats. that car must be a blast to drive on the street.

[Roybatty]

No rev limiter? Hope you're ear plugs were in! Good run.

Sent from garage

[GTwizard]

Lots of fun in this car. And for the first time beat a stock VR4s that dynoed. LOL.
So we are pleased with the results of a first time Dyno with the new flashable.
Bumped timing 7 deg before 1st dyno, than 7 more, after 1st pull as still had no knock. 2nd pull had knock in a coupls of spots and pull 4 back out in those ares.
But the real fun is the Launch control. It is so cool to launch and not have to get out of the throttle do to tire spin and hop.
Thank you guys for taking an interest and supporting the hard efforts we put forth in bringing the NA foreward to a vary respectable performance level.

[GTwizard]

Found a vid.

http://www.youtube.com/watch?v=a0PtX92EuhY&feature=player_embedded

[Ninja Performance]

Great Results!

-Chris

[GTwizard]

Would like to submit that Dyno sheet for getting on your "Dyno Database" for NA's.
Other than I really did not see one.