Cianci Pillars, Transmissions, Rebuilt TT Heads, FMIC, Greddy RS, BB STS & more!

[92RT-TT]

Trying to clear out some of my extra stuff I have at the shop sitting in boxes. Prices do not include shipping. I'll upload some pictures in a few days

Interior
-Katzkin headrests embroided “Stealth” – 50 for the pair (brand new)

-Cianci 52mm 3 Gauge A-pillar with matching passenger side (brand new still in box)- 145 plus shipping

-Cianci 60mm 3 Gauge A-pillar – 70 plus shipping

-Prosport smoked boost gauge (kind that the face is black until it turns on)- 40 plus shipping

-Factory CD Changer (from 94)- 50 plus shipping (included carpet that covers it)

-Manual Sunroof Crank assembly –just the crank assembly no plastic interior covers (these assemblies are 300+ from retailers)- 175 plus shipping


Engine and Drivetrain
-Fresh 1st Gen TT heads. All new MHI parts used- New Valve stem seals- Decked- 3 angle valve job- boiled- ready to bolt onto your motor- 700 plus shipping

-Pampena Motorsports FMIC Core – Brand New- Asking 75 plus shipping (still in the box).

-25 spline 5 speed Tranny –Needs to be rebuild. 1st gear is bad. Asking 350 plus shipping

-18 Spline tranny- Needs output shaft/rebuild- asking 275 plus shipping

-18 spline transfercases (3)- Condition unknown but visually they look ok- 150 each
plus shipping. (If I were buying one I’d take it apart, put new bearings and seals in them and then you know you’d have a good to go TC for half the price of buying a new one).

-SeattleVR4 Short Throw Ball Bearing Shifter (brand new) for 2nd gen: 150 plus shipping

-Greddy Type RS Bov- 1 month old. I bought one of the last brand new ones of these for over 350 dollars because I wanted a brand new one so I didn’t have to worry about it leaking. I have the instructions and all that came with it as well as open and closed recalculating adapters. You can’t find one that has this iconic woosh sound like the RS had. The new type RZ sounds like crap compared to the RS. Asking 300

-Stock SMIC- 6 SMIC’s in average to good condition- all worked fine- 25 each plus shipping

I had pictures of a couple parts already on photobucket so here are those ones (rest will come later tonight or tomorrow)
http://i173.photobucket.com/albums/w56/hemidartguy/4e8fe8c2.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/b6fae9c4.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/c893b8f7.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/4fd18074.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/photobucket-8614-1349960320179_zps03f66e99.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/photobucket-2506-1349960331840_zps8ffd937e.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/photobucket-1501-1349960344632_zps6df35ad4.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/photobucket-6089-1349960380331_zps509c86a4.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/photobucket-2163-1349960419865_zps6933b0ab.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/photobucket-2339-1349960448455_zpscd815e65.jpg

I'll snap the rest of the pictures tonight and post them up. Thanks for looking!

[IronmanTT]

Interested in these Cianci 52mm 3 Gauge A-pillar with matching passenger side (brand new still in box)- 145 plus shipping and Pampena Motorsports FMIC Core – Brand New- Asking 75 plus shipping (still in the box) pending pics... oh yea can you get me price shipped to 75081 zip? Thanks..

[92RT-TT]

Interested in these Cianci 52mm 3 Gauge A-pillar with matching passenger side (brand new still in box)- 145 plus shipping and Pampena Motorsports FMIC Core – Brand New- Asking 75 plus shipping (still in the box) pending pics... oh yea can you get me price shipped to 75081 zip? Thanks..

I'll have to open both the boxes tonight and take a couple pictures because both are still in the boxes they were shipped in from Pampena and 3sx. I'll also measure how big the boxes are and get you a quote and hopefully let you know late tonight :)

[92RT-TT]

Interested in these Cianci 52mm 3 Gauge A-pillar with matching passenger side (brand new still in box)- 145 plus shipping and Pampena Motorsports FMIC Core – Brand New- Asking 75 plus shipping (still in the box) pending pics... oh yea can you get me price shipped to 75081 zip? Thanks..

The pictures are on the first post of the FMIC core and the box/3 gauge a pillar. I didn't unwrap the matching passenger side but its in the box.
The FMIC Core is $23.19 via UPS and the Cianci A pillar is $32.66. Those are actual costs with no markup or anything. Box dimensions were 34x15x6 for the fmic core weighting 19 lbs and the cianci a pillar box is 10x10x52 weighting 8 lbs. Let me know if you'd like to go ahead with one or both of them. Thanks

Dan

[92RT-TT]

bump!

[92RT-TT]

Someone has to need some parts, BUMP!

[92RT-TT]

Bump make some offers!

[ntcmpjg]

Can you post a picture of the boost gauge


Sent from my iPhone using Tapatalk

[92RT-TT]

Here ya go:
http://i173.photobucket.com/albums/w56/hemidartguy/photobucket-5553-1331102029642.jpg

[schoonie]

I am in desperate need of a couple of input shaft parts for the getrag W6MG1 6-speed if anybody has some parts laying around that they are willing to part with or knows of anybody with parts please let me know!!!
I need the inner bearing race for 3rd or 4th gear and the small ball bearing that sets in the input shaft

[spaceace60]

interested(probably take it!) if it reads neg boost as well? as some only read pos boost?

[Snook]

Ill take the fmic

[Snook]

Scratch that realized only core.

[Hubbell92TT]

Ill take the 60mm a pillar. Text me your Paypal. 724-288-4503

[Blue91SL]

Asking girlfriend about the headrests.

[LeRoyDL]

Specs on fmic? I most likely want it.

[Hubbell92TT]

Bump .....

[Blue91SL]

Would you do $50 shipped on the headrests?

[ItTricky]

dan i'll probably buy the 52 mm gauge pods from you

[Bloodlust182]

Got a good condition pass side stock smic pic handy?

[Hubbell92TT]

still waiting to hear back about this 60mm pillar pod... this guy isnt a very good salesmen.

[ItTricky]

he's a busy guy, i'll text him tell him to check it out