PDA

View Full Version : I need help with apexi safc2



dsmnoob91
10-09-2012, 02:25 AM
I finally got my safc2 hooked up tonight but heres my issue it turns on and all that works but when you start the car it idles at 650rpm's And leans right out and then te check engine light comes on, when you try adjusting the fuel trims it does nothing at all if u unplug it it jumps up to 1500 rpm's and runs great I know of one issue with the car and that's that the o2 sensors will not communicate with the car for some reason that's why it runs so rich. I was told It wouldn't make that big of a difference and you can still tune with them not working by another Mbr here... I have stock injectors in now he also told me to try my 450's and seeing if that made a difference or not. Any ideas?

Chris@Rvengeperformance
10-09-2012, 11:58 AM
what does your logger say when the CEL comes on?

dsmnoob91
10-10-2012, 01:53 AM
I don't have a logger hooked up i can't figure that out is there a write up for a the 3sx PDA one anywhere?