- EcuFlash 99Rom_gctech_V1
- anyone here done a harness swap?
- Balance tube placement?
- recirculating BOV on td05 stroker?
- Has anyone had an success re-using a crankshaft thats' spun a bearing?
- First run Finally!! What do you guys think
- How are you logging your wideband??? MMCD
- How to store a shortblock.
- Crate motors.
- OEM intake 60mm -> 70mm ?
- would these pistons work?
- SMIC vs FMIC
- Taking my freshly rebuilt engine that hasn’t been started BACK apart …
- Exhaust Manifolds
- saving the world 2 strokes at a time,amazing engine
- Need help...car won't idle after fuel pump hotwire
- budget? what's that? (seriously, though, i need some fuel rails)
- Questions about shipping an engine. I need advice.
- vibration and knocking sound
- E-manage blue to ultimate
- Turbine wheels (td04L)
- 2 Stock Fuel Pumps better than 1?
- Taking it to the next level - EFI U?
- Seal exhaust manifold leak
- I adjusted the front injector harness with the car running and it DIED.
- Idle issue IAC steps
- Valve Steam Seals?
- Switching over to MAF
- Engines and..stuff.
- Opinions on these methods to lower knock and IDC's...
- Engine Knock - help with logs - adjusting SAFC
- o2 housing
- i am in need of a set of td04 turbos
- ECU Parts Interchangeable?
- different a/c brackets??
- Does my dyno chart look right?
- Ok, how does everyone get this pulley off when doing timing belt?
- Oil in exhaust manifold
- wideband vs narrowband?
- Crank Scrapers for 6G72?
- Coolant
- whats it worth?
- Low Boost
- E-Manage Water Temp
- Ok so I want 10s
- Help indentify camshaft - possible combination with stock exhaust camshaft
- Sharing / Splitting MAP Sensor Signal Greddy Gauge and E-manage Ultimate
- LOUD pop when reved
- Wastegate solenoid clicking - options?
- Help Identifying Turbo
- Turbo Quandary
- Internal or External wastegate for TD05's
- MSD DIS-4 install help.
- Full throttle "hesitation"
- New bov, spring pressure?
- Did the GTO have a 13g turbo option?
- anyone running 13t's with 450 injectors
- DSM crank pulley help
- yes im a knuckle head
- Harness wire?
- AEM ECU users
- HHH log check
- 1000cc injectors
- Cheap no maf intake
- New EVO gauges installed
- Ok, so I want 8s
- E85
- I want more boost
- Air/Fuel Controller...Help me choose
- help with AEM Sensor mounting locations
- Question about gaskets
- 413.5 bhp at the flywheel from standard injectors
- Which Maf setup with dr750s
- delete this mods,
- walbro pump installation question
- My finished winter project for this year.
- Quick Question About Crank/Bearings.
- upgraded cat?
- Was boosting 11-12psi / now only 8-9psi
- Tips on removing RPS flywheel plates?
- Fuel Trim Adjustyment
- 92 vr4 pedal response
- Whats needed to go wideband O2?
- FMIC (PMP) Install - mounting the core
- Upgraded Fuel Line
- Best Injector - Fuel Injector Clinic (FIC) VS. Injector Dynamics
- Look at these HEADS! Whoever on 3si sold Trev this car... You sir are an a-hole!
- Cam seal replacement
- O2 elimination
- No intake pipes... drawbacks?
- Interference, Non-Interference.....
- My Custom DNP Blow through Y pipe
- Single Billet Turbo Setup.
- My new gauges
- what gap are you guys with ignition boosters running?
- My big fuel pump mystery / problem.
- Throttle Bodies
- Oil in coolant?
- Blow-thru suggestions
- Part number for the universal 4 wire o2 sensors that fits our cars?
- SAFC 2 settings on stock injectors
- running dual catch can set up
- Now that the weather is warming up...
- Turbo Replacement Parts Needed When Utilizing 3SX Oil, Coolant, & Stud Kits
- My new gauge set up
- fmic
- bov ?
- Name that sound! With video. Sigh.
- need new Coil Pack
- 600 AWHP daily driver
- Cold compression #s
- crankshaft spacercan it be installed wrong?
- Ecu
- No Start, Potential ECU Issue
- Rear valve cover removal problem
- Oil Pressure Gauge issue?
- Emanage Ultimate tuning and maps thread
- Fuel Pump
- EBC reads differently than boost gauge
- TOC TOC! Engine Knock inside with video! Help me diagnose it.
- Burnanating Oil
- ecu ?
- Fuel Pressure Drop - Baffled...
- Marsmik REBUILD thread due to Spun bearing cyl #2
- Best place to get a 92 vr4 ecu or have mine rebuilt?
- Tips/Tricks Confirmation On 3SX SS Oil Like Kit
- JDM GTO Emanage Ultimate Boomslang
- 92 vr4 spun bearing
- 92 vr4 maf
- Starting: Low to High RPM Flux
- People w/ lc-1 and scanmaster 3
- Recommend Turbocharger Coolant Hose
- fmic from split second motorsport
- Anybody know aboooout how large the stock muffler was?
- Pro's and Con's of turbo blankets- lets hear em!
- What temp does your VR-4/TT run at.
- Puller to pusher (Cooling Fan)
- How Well Has Your Ceramic Coating Held Up????
- How Many People are Running Pusher Fans?
- no start :(
- Maft + Emu Emanage Ultimate
- Injector question for tuners
- EGR system removal
- Cylinder 6 dead
- afpr and boost controller are on the same vacuum line
- Don't ya hate it when you realize you left something off?
- SPA dual digital gauges.
- Hot wire vs. RDR rewire
- Stupid Noise
- AEM UEGO? single or dual?
- ETS Front Mount Install
- z06 85MM Maf Draw Through Maft Pics
- Innovate LC1 wot issue
- Electrical Problems
- Calling all Experts, Engine Mngt recommendations for my TD04HL WRX 19T Track Car
- 92 vr4 firing issues
- Engine Mount Torque Specs
- Possible IAC, ECU or EMU tuning issue?
- Oil Pressure drop
- Is this a good spot for a wideband?
- Which WB02 do you prefer?
- Fuel trims maxed lean
- Emanage Ultimate Problem
- single turbo t3/t4 manifold
- Another Piece To The "Hennessey" Puzzle
- Potential of 13G's
- Car started overheating would like some idea's on possible issues.
- Thankfully 'm not part of the spun bearing club :)
- 99 ECU flashing for a 94 TT
- Help!!! Headed to NG, have intermittent ignition issue
- Breaking in motor with 16gs?
- Help!!!! WON'T STOP SMOKING!!!
- Tach quite working
- Datalogging Hybrid ECU
- help with some main issues.
- Engine Oil and lubricaton after 2 years of no use
- Rebuild my own engine?
- Engine knock under low load/boost
- Consolation mods
- vr4 keeps blowing ignition fuse. HELP
- Radiator leaking :/
- Oh no! Is this a leaky capacitor??
- Can the oil and coolant lines...
- Replace rear main seal without removing housing possible?
- Name that part!
- Mystified
- fuel tuning information/build log thread
- My brothers 93 RT/TT wont start
- TD04-13g's
- Need AC help
- Is this engine tick anything to worry about?
- Single Turbo setups...
- Dual Core FMIC for Dejon Blow Through setup
- Need some help with a lean condition
- running lean on highway using aem ems
- Rough idle out of the blue?
- Interesting forum exchange on twincharging..
- 16Ts, SMIC or FMIC? Only shooting for 450awhp.
- SMM Radiator
- fuel pump: walbro or denso
- Fuel Pressure and Fluctuating o2 sensor voltages
- Vpc/gcc
- SSM TD04 MAF-less pre-turbo pipes
- Buying a 94' VR4 Tomorrow. I have a couple questions....
- Digital Climate Control Glitch
- Can an ISC go bad in one year?
- stumbling under low load between 2.5-3k
- Log, first one, no pulls, Front O2 bad? Fuel Trim seems off.
- TD05 turbine wheels
- Do I need to upgrade injectors???
- AEMS EMS v2 help w/ o2 sensors needed
- Aftermarket Oil Feed Lines
- what can cuase no spark from a good coil pack?
- E85 and 450cc injectors
- Chirp sounds - Tension Pulley or Idler Pulley?
- Overheating with TD05 turbochargers
- Whats the best Recirc BOV?
- I have a chance to buy a Stealth RT TT!
- Spark plugs & such
- Need Some Blitz SBC-ID help
- Absolutely Necessary systems
- Forged bottom end help/advice needed
- Intercooler fin straightening
- Oil pressure issue help pls
- Yogurt ICH 4" exhaust question
- Stealth TT shaking at random times, code 41 also randomly
- Leak Down Test Results 161,000 mile stock shortblock
- Midwest Turbo Connection is looking for a pilot TD05 car that wants Billet Wheels
- 3SX 264/272 cam timing
- Head Thickness. Experts please
- GM maf w/ recirc bov?
- CxRacing turbos...
- Troubleshooting cylinder misfire code
- I have joined the club.
- getting a 91stealth tt on monday
- 94 RT/TT - Surging and a Dead Battery Afterwards
- Oil Weight vs Oil Pressure Issues
- in need of bearing stay caps.
- 1992 stealth RT/TT Oil preassure Question
- The oil thread.
- Tach not working properly
- good shop for high hp rebuild nc/va?
- request for a tech help video
- Engine Pre-oilers
- Car was running but now will not start
- what can cause erratic spark?
- too much boost?
- Pre-Turbo Meth Injection
- Cutting out at WOT
- Help!!!!!!