Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: 300M Coil On Plug / COP Setup

  1. #1
    Pass Me Another Hooker Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Location
    Toledo,Ohio
    Posts
    227
    Thanks
    9
    Thanked 3 Times in 1 Post
    How hard is this to make. I am always to scared to make something that could possible hurt my engine due to me not making it up to par, anyone making these as kits and selling them?

    Thanks for the info!

  2. #2
    Pass Me Another Hooker Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Location
    Toledo,Ohio
    Posts
    227
    Thanks
    9
    Thanked 3 Times in 1 Post
    How hard is this to make. I am always to scared to make something that could possible hurt my engine due to me not making it up to par, anyone making these as kits and selling them?

    Thanks for the info!

  3. #3
    Rice Patrol verified Feedback Score 0 Mean Green's Avatar
    Join Date
    Sep 2010
    Owner Since
    2007

    Posts
    200
    Thanks
    1
    Thanked 6 Times in 4 Posts

    300M Coil On Plug / COP Setup



    You can get the coils from the following vehicles:


    1999-2004 300M , Concord , Intrepid , 2.7L 3.2L 3.5L
    1999-2001 LHS 3.5L
    2004 Pacifica 3.5L
    2002 Prowler 3.5L
    2001-2004 Sebring 2.7L
    2001-2004 Stratus 2.7L


    You will also need to make plates to hold the coils in place or make your own custom mounts for them. Otherwise it is cheaper than using motorcycle coils and having to buy an MSD DIS4.

  4. The Following 2 Users Say Thank You to Mean Green For This Useful Post:


  5. #4
    Rice Patrol verified Feedback Score 0 Mean Green's Avatar
    Join Date
    Sep 2010
    Owner Since
    2007

    Posts
    200
    Thanks
    1
    Thanked 6 Times in 4 Posts
    Quote Originally Posted by 93SlugTT View Post
    How hard is this to make. I am always to scared to make something that could possible hurt my engine due to me not making it up to par, anyone making these as kits and selling them?

    Thanks for the info!
    I can possibly start making the harness's and provide coils but I cannot make the mounts.

  6. #5
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Posts
    623
    Thanks
    10
    Thanked 26 Times in 25 Posts
    Mean Green, interesting to see you`ve wired them up in series rather than paralel (sp?), is it to keep the load down on the PTU?.
    GTO-TT, PTE 1200's, M20, Emanage Ultimate, OS Geiken R3C,
    TD04-16g`s, Maf-t. 13g`s 12.4@115mph / 16g`s 12.5@117mph.

  7. #6
    Rice Patrol verified Feedback Score 0 Mean Green's Avatar
    Join Date
    Sep 2010
    Owner Since
    2007

    Posts
    200
    Thanks
    1
    Thanked 6 Times in 4 Posts
    Quote Originally Posted by KeithMac View Post
    Mean Green, interesting to see you`ve wired them up in series rather than paralel (sp?), is it to keep the load down on the PTU?.
    Precisely. If it does not work out though, I will wire them parallel. Someone said earlier that they hit 15psi and got misfires but they had bad plugs and I also don't know the other conditions. My car idles perfectly with this setup but I have done this to eliminate my coils being a problem in the first place. I also made mine to where I could put it all back stock if I needed to without having to modify anything.

  8. #7
    Rice Patrol verified Feedback Score 0 Mean Green's Avatar
    Join Date
    Sep 2010
    Owner Since
    2007

    Posts
    200
    Thanks
    1
    Thanked 6 Times in 4 Posts
    If Series does not work well, then I will try this:



    Worst case scenario is that I get another ignition module / ptu from another 6 cylinder car that has 6 individual coil packs and wire it in.
    Last edited by Mean Green; 09-23-2010 at 06:41 PM.

  9. #8
    Forum User verified Feedback Score 2 (100%)
    Join Date
    Sep 2010
    Owner Since

    Location
    Bolton MA
    Posts
    333
    Thanks
    62
    Thanked 34 Times in 21 Posts
    Mounting plates should be available soon. We are testing the 300M coils. Ive had sets done for about 4 months.
    Trash Can Club

  10. #9
    Forum User Not Verified Feedback Score 1 (100%) ntcmpjg's Avatar
    Join Date
    Sep 2010
    Owner Since
    2006

    Location
    Bamberg, Germany
    Posts
    622
    Blog Entries
    2
    Thanks
    3
    Thanked 22 Times in 16 Posts
    price match parts makes COP set up but they dont have any pictures
    http://www.pricematchedparts.com/pro...-3462-268.html

    3000GT of Europe
    www.3sofeu.org/main
    Cherry Hill Mitsubishi Coupon Code- 3SE

  11. #10
    Forum User Feedback Score 0 3000GT MR's Avatar
    Join Date
    Sep 2010
    Owner Since

    Posts
    53
    Thanks
    1
    Thanked 3 Times in 3 Posts
    Is it possible to run a HKS or boost a spark config. on this set up?
    Fully Forged, 16G's ect.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
3000GT / Stealth / GTO Resources
3000GT / Stealth / GTO / Multi-site Classifieds
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive