Gauging Interest: LED Conversion kit

**Atrosity** · 09-23-2010, 12:59 AM

This is not my car but I am planning to make a kit for LED Conversions to replace all the stock old LED bulbs.

This kit will include--

-All Leds for the interior of the car.
-Resistors
-Solder
-Soldering Iron
-Epoxy

And how to install the kit.

**Atrosity** · 09-23-2010, 01:34 AM

Yes this is a do it yourself kit which is a lot different. The write up will walk you through the process. Appreciate the support.

**terrets** · 09-23-2010, 01:39 AM

Definitely interested depending on price. Shouldnt be bad right? Could you please offer a kit with only LEDs and Resistors, as I have solder and an iron.

**Atrosity** · 09-23-2010, 01:42 AM

Originally Posted by terrets

Definitely interested depending on price. Shouldnt be bad right? Could you please offer a kit with only LEDs and Resistors, as I have solder and an iron.

The idea is to supply everything you need to make it happen, so the customer will be able to read the manual and start installing the kit. You can always throw away the Solder and Iron.

**terrets** · 09-23-2010, 01:52 AM

Haha. But I dont need the solder and iron so why would I want to pay for it

.

**Atrosity** · 09-23-2010, 01:56 AM

Yeah of course, I may not include the solder and iron all together if that is what everyone feels.

When I get the ball rolling I will send you LEDs and Resistors and a complete installation manual. I will be installing this on my friends spyder who has all his stock leds in tact to do a great write up.

The manual will show a person who has no electrical experience how to install the lights with out any hiccups or problems.

The price is going to be around $100 but not confirmed.