Results 1 to 10 of 10

Thread: work saftey???thread or no

  1. #1
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Posts
    2
    Thanks
    5
    Thanked 0 Times in 0 Posts

    work saftey???thread or no

    quick question? what does osha require for going into a confined space ,to wash cattle blood out. specifically a tanker truck , and what are my health risks anybody know?

  2. #2
    Man vs 3/S verified Feedback Score 6 (100%) R/T93's Avatar
    Join Date
    Sep 2010
    Owner Since
    2003

    Location
    Kingston, WA
    Posts
    1,542
    Thanks
    124
    Thanked 173 Times in 114 Posts
    Working on submarines, any termed "confined space" needs to be gas free certified with an air sniffer periodically and we require a tank watch, someone standing outside the hole or tank you are in making sure you are OK at all times.

    I have no clue what the requirements are for the outside world, the stuff we put up with in the NavSea and OSHA are horribly inneficient regarding safety vs time ratio.
    93 R/T - Modded, Full Suspension, Full Exhaust, Quaife Diff, Turbo brakes, Alpine/Boston Sound One of 25
    98 VR-4 - Billet 13t's, Downpipe, Blitz EBC, Ohlins R/T coil overs, SCE center differential, SCE oil pan, Pampena braced trans, TEC Rear Strut Bar, Custom Front Strut Bar, Camber Arms, Alum Driveshaft, 2" Koyo, Maximal oil cooler, SAFC2, Defi Gauges, RC 550's, Supra Pump, Skillard Splitter, Hardpipes, XYZ 14" front brakes/Carbotech, 255 Dunlop Z2's, AMR 18x9's, Alpine/Infinity/JL Sound. One of 13

    3SNG15 Best overall




    "I explode 1 piece rotors" -- ABM --
    Runs 12's (12.98's!!!!!!)
    My Garage

  3. #3
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Posts
    2
    Thanks
    5
    Thanked 0 Times in 0 Posts
    yeah its starting to get a little scary ,, i cant lift myself out after i get through scrubbing it out ? only like 20 minutes of work. and i should have no problems in my opinion ,i run, bench my body weight and so forth. i'm not the only one ethier ,our concerns have been met with the quote."there are other jobs" but no safety equipment not even goggles? using a 180 degree hose to wash it out ? will blood put off a gas when it dry's or is heated like that ?

  4. #4
    Forum User Feedback Score 0 ferriolom's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Herkimer, NY
    Posts
    16
    Thanks
    1
    Thanked 1 Time in 1 Post
    Chemically no.

    There will be dormant, and not so dormant bacteria present, and it will reek.
    1991 Stealth R/T TT

  5. The Following User Says Thank You to ferriolom For This Useful Post:


  6. #5
    Forum User Feedback Score 0 EZnTn's Avatar
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    LA .. as in Lower Arkansas
    Posts
    66
    Thanks
    8
    Thanked 7 Times in 7 Posts
    I'm surprised you didn't have a ladder first off.
    Always for a confined space you should also have a watcher who will not, under any circumstances, come into the area
    Space should be vented with an exhaust air system.
    I'd recommend PPO including goggles, gloves, tyvek suit.
    Unless the odors are such that they oxygen levels are not sufficient, you wouldn't need a SCBA

    Plenty of definitions and information on confined space out there, google it.

  7. The Following User Says Thank You to EZnTn For This Useful Post:


  8. #6
    Forum User verified Feedback Score 1 (100%) BadHabit's Avatar
    Join Date
    Sep 2010
    Owner Since
    2008

    Location
    N.C.
    Posts
    81
    Thanks
    5
    Thanked 5 Times in 5 Posts
    All the necessary equipment(motors,electrical,hydraulic is to be locked out and tagged.You are not supposed to go in there until the air is tested and then you are "supposed" to be lowered by a winch.There is to be some type of emergency air nearby.You are to have someone sit at the entrance(trained confined space attendant) and test the air every so often.Last but not least you do not even enter until you have a signed Confined Space Permit.
    **Note
    the reason for the winch is in case you are rendered unconscious,they can pull you out without getting a hernia.
    You did say OSHA requirements right?
    Last edited by BadHabit; 09-17-2010 at 08:21 PM.

  9. The Following User Says Thank You to BadHabit For This Useful Post:


  10. #7
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since

    Posts
    2
    Thanks
    5
    Thanked 0 Times in 0 Posts
    yeah OSHA thanks guys , i always wondered about it? i know you have to be careful or you'll face will begin to burn just from being in there.and your sinuses get all messed up for a couple days . but i didn't want to start too much of a fuss before i knew whether it was a legitimate concern. could cost me the job ? right now there are a total of 3 people who wash it out so it wouldn't take long for them to eliminate and find the person who turned them in . i wish the plant saftey manager would jump them ,but we are subcontracted to them?? I think I'll make a call to osha though .

    they said there is no bacteria active because it was refrigerated most of the way.I called BS and got shot down.

    will osha shut the company down or just tell then to get there crap together?

  11. #8
    Forum User Feedback Score 0 EZnTn's Avatar
    Join Date
    Sep 2010
    Owner Since
    2001

    Location
    LA .. as in Lower Arkansas
    Posts
    66
    Thanks
    8
    Thanked 7 Times in 7 Posts
    If OSHA comes in to follow up on a complaint, worksite is required by law to accommodate them.
    I've had OSHA visit a manufacturing facility I ran.
    I was glad they showed up, I got the dust abatement system I'd been requesting for several years.
    At the end of it all, our levels were within guidelines, after OSHA & our corporate contracted firm determined dust levels (fiberglass).

    Would they shut your place down? Have to be some rather serious infractions for that to happen.
    Not knowing specifics of your situation, be difficult to determine.

    As BadHabit alluded, to do it properly, a "Confined Space Permit" needs to be issued.
    It sounds like the place where you're cleaning out these tank trucks doesn't really have their act together at all.

    Here's a good link to get you up to par on what OSHA requires.
    I'm sure there are specifics for your situation, but this is a start.

    http://www.osha.gov/SLTC/confinedspaces/index.html

  12. #9
    Wrench Monkey Not Verified Feedback Score 1 (100%) TwIzTeD_3kGt's Avatar
    Join Date
    Sep 2010
    Owner Since
    2005

    Location
    Rochester, NY
    Posts
    714
    Thanks
    41
    Thanked 26 Times in 19 Posts
    They cannot fire you in retaliation to an OSHA complaint.
    1997 3000GT VR4 - Solano Black Pearl - E85 - E316G-BIG - All the boost
    1993 3000GT VR4 - Maroon/Blacktop - Back to stock/Restoration
    1994 Stealth R/T - Primer - Parts store

  13. #10
    Thermal Engineer- Mmbr Since:8/2005 verified Feedback Score 0 Alex3000gt's Avatar
    Join Date
    Sep 2010
    Owner Since
    6/2005

    Location
    Ann Arbor, MI
    Posts
    735
    Thanks
    277
    Thanked 128 Times in 98 Posts
    Quote Originally Posted by EZnTn View Post
    I'm surprised you didn't have a ladder first off.
    Always for a confined space you should also have a watcher who will not, under any circumstances, come into the area
    Space should be vented with an exhaust air system.
    I'd recommend PPO including goggles, gloves, tyvek suit.
    Unless the odors are such that they oxygen levels are not sufficient, you wouldn't need a SCBA

    Plenty of definitions and information on confined space out there, google it.
    Correct! And also a co or co2 monitoring system and a proper training program.

    '92 3000GT Base ATX converted to MTX - Parted Out
    '91 Stealth ES MTX - Fastest NA FWD at NG11 Drags - SOLD
    '91 Stealth RT/TT Check out my blog
    '10 Jetta TDI MTX - 6 speed: 50MPG Highway
    Rest In Peace, My Brother SGT. R. Evans Taylor: Apr 23 '83 - Oct 14 '11

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering