Would this kit work to convert my 15g's into a 19t? Says the compressor housing is machined to fit the 19t wheel, but what else would be needed if anything? http://cgi.ebay.com/Turbo-Compressor...item415361e87b
Would this kit work to convert my 15g's into a 19t? Says the compressor housing is machined to fit the 19t wheel, but what else would be needed if anything? http://cgi.ebay.com/Turbo-Compressor...item415361e87b
It should work, as the shaft is the same for both turbos. I'm looking into doing this myself sometime next year if I find the time, I have 13T's.
Unless the compressor wheels have the same od, the center section needs to be machined also. Blouch turbo has Brand new td04hl 19t's for $2100 anyway.
Which center section are you referring to? The kit comes with a new compressor housing that mates with the 19t wheel, what exactly would need to be machined?
The center section of the turbo that houses the bearings. On a mitsu turbo the center housing is also the compressor wheel backplate. Look at the compressor side of a mitsu center housing, there is an area machined into the housing that the back of the compressor fits into. If you go to a compressor with a different outside diameter, the machining of the center housing needs to be the right size.
this is from http://stealth316.com/2-turboguide.htm i think it will help. stealth316 is a great site for some how to's. book mark it.
good find though, i might look into doing this.
Last edited by thor'svr4; 10-28-2010 at 09:30 PM.
the basic go fast bits...
forged short block, Billet DR1000's, 680cc injectors, meth inj, FMIC, MAFT, Apexi Neo, hotwired 255lph fuel pump.
Tuned by Ray Pampena
Just a fun Daily Driver.
Things to consider before doing this would be:
1. fitting the wastegate to the compressor housing. the ones included will not fit.
2. the size of the compressor housing clearing the forward motor mount.
I think there may be better options, like modifying your 13t/15g to accept a bigger compressor. Thats really simple machine work that should be fairly cheap.
so if this is the center cartridge your saying that the circular recessed part in the first pic is what would need to be enlarged?
http://cgi.ebay.com/ebaymotors/TD04-...item2c57bd252d
3000gt.com 3000GT / Stealth International WWWboard Archive Jim's (RED3KGT) Reststop |
Team 3S 3000GT / Stealth / GTO Information daveblack.net |
Michigan 3S MInnesota 3S Wisconsin 3S Iowa, Nebraska, Kansas 3S |
North California 3000GT/Stealth United Society of 3S Owners 3000GT/Stealth/GTO Forums 3000GT/Stealth International |
3S National Gathering East Coast Gathering Upper Mid-West Gathering Blue Ridge Gathering |
Bookmarks