Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Cold Air Intake Idea!

  1. #1
    Forum User Not Verified Feedback Score 4 (100%)
    Join Date
    Sep 2010
    Owner Since

    Posts
    184
    Thanks
    3
    Thanked 1 Time in 1 Post

    Cold Air Intake Idea!

    Well while my engine is out, I decided to relocate a few things. Anyway i think i figured out a nice way to route the intake

    Would this work? The pipe will go under fuse box and to engine. I know i will have to extend the MAS plugPicture 009.jpgPicture 010.jpg

  2. #2
    Better than that "other" place Not Verified Feedback Score 2 (100%) x2xtreme360's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    527
    Thanks
    0
    Thanked 32 Times in 14 Posts
    You're just asking for trouble with a cai... And they're really useless. No point.

    Vacuum reduction, Powdercoated misc, cruise relocate, Evo9 BOV, Custom catch cans, Russell fuel filter, SS braided fuel lines, High flow fuel loop, Autogage fuel gauge, Catless DP, DNP Y-pipe, Fuel pump hotwire.

  3. #3
    1st ever COTM and COTY verified Feedback Score 9 (100%) green-lantern's Avatar
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,250
    Thanks
    654
    Thanked 459 Times in 354 Posts
    It's a good way to hydrolock your engine when it rains. Don’t ask me how I know.

    Quote Originally Posted by HilbillyHomeboy View Post
    I bet she smells of old mustard and sawdust.
    Jeremy

  4. #4
    Forum User Not Verified Feedback Score 4 (100%)
    Join Date
    Sep 2010
    Owner Since

    Posts
    184
    Thanks
    3
    Thanked 1 Time in 1 Post
    Quote Originally Posted by green-lantern View Post
    It's a good way to hydrolock your engine when it rains. Don’t ask me how I know.
    What if i added a check valve, so when water tries to get it it wont suck it up?

  5. #5
    Better than that "other" place Not Verified Feedback Score 2 (100%) x2xtreme360's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    527
    Thanks
    0
    Thanked 32 Times in 14 Posts
    Quote Originally Posted by Assy View Post
    What if i added a check valve, so when water tries to get it it wont suck it up?
    A check valve is a one way valve. That means that a check valve will not prevent water from being sucked up into your engine.

    CAI do not net any performance gains, and I'm pretty sure your engine is out being rebuilt due to a spun bearing and lack of oil pressure Don't make things worse for yourself... the stock configuration is fine. If you really want to, you could get an aluminum isolator box so the filter doesn't suck in hot engine air... but again, will you see gains? No.

  6. #6
    Forum User Not Verified Feedback Score 4 (100%)
    Join Date
    Sep 2010
    Owner Since

    Posts
    184
    Thanks
    3
    Thanked 1 Time in 1 Post
    Quote Originally Posted by x2xtreme360 View Post
    A check valve is a one way valve. That means that a check valve will not prevent water from being sucked up into your engine.

    CAI do not net any performance gains, and I'm pretty sure your engine is out being rebuilt due to a spun bearing and lack of oil pressure Don't make things worse for yourself... the stock configuration is fine. If you really want to, you could get an aluminum isolator box so the filter doesn't suck in hot engine air... but again, will you see gains? No.
    Well i ment more like a small filter higher up the pipe, so when the pressure is to much it will pull from there thus making the water fall out right? Why do people put cai if it doesnt help?

    Leave my engine alone! :P and not so much a spun bearing, its more like wore out bearings haha

  7. #7
    Better than that "other" place Not Verified Feedback Score 2 (100%) x2xtreme360's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    527
    Thanks
    0
    Thanked 32 Times in 14 Posts
    Quote Originally Posted by Assy View Post
    Well i ment more like a small filter higher up the pipe, so when the pressure is to much it will pull from there thus making the water fall out right? Why do people put cai if it doesnt help?

    Leave my engine alone! :P and not so much a spun bearing, its more like wore out bearings haha
    People install CAI's because they are uninformed. Not that I'm saying anything about you when I say that... but that's really the reason. People seem to think that they actually do something. Even if the air is a few degrees cooler down there, it doesn't make a difference. You should be worrying about upgrading your intercooler Those help a lot more.

  8. #8
    Forum User Not Verified Feedback Score 4 (100%)
    Join Date
    Sep 2010
    Owner Since

    Posts
    184
    Thanks
    3
    Thanked 1 Time in 1 Post
    Quote Originally Posted by x2xtreme360 View Post
    People install CAI's because they are uninformed. Not that I'm saying anything about you when I say that... but that's really the reason. People seem to think that they actually do something. Even if the air is a few degrees cooler down there, it doesn't make a difference. You should be worrying about upgrading your intercooler Those help a lot more.
    I see, I wont do that then. Iv heard people say they gutted the MAS what will that do? And if i was a TT i would do that but sadly im N/A

  9. #9
    Better than that "other" place Not Verified Feedback Score 2 (100%) x2xtreme360's Avatar
    Join Date
    Sep 2010
    Owner Since

    Location
    Cazenovia, NY
    Posts
    527
    Thanks
    0
    Thanked 32 Times in 14 Posts
    Quote Originally Posted by Assy View Post
    I see, I wont do that then. Iv heard people say they gutted the MAS what will that do? And if i was a TT i would do that but sadly im N/A
    Why did I think you had a GTO? Anyway, gutted MAS isn't advised either because the honey comb keeps the air going straight. There's really not a whole lot you can do with the intake on the NA's besides an open element filter. Our cars are pretty nonrestrictive from the factory.

  10. #10
    1st ever COTM and COTY verified Feedback Score 9 (100%) green-lantern's Avatar
    Join Date
    Aug 2010
    Owner Since
    Birth

    Location
    Tennessee
    Posts
    7,250
    Thanks
    654
    Thanked 459 Times in 354 Posts



Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive
Jim's (RED3KGT) Reststop
3000GT/Stealth/GTO Information and Resources
Team 3S
3000GT / Stealth / GTO Information
daveblack.net
3000GT/Stealth/GTO Clubs and Groups
Michigan 3S
MInnesota 3S
Wisconsin 3S
Iowa, Nebraska, Kansas 3S
North California 3000GT/Stealth
United Society of 3S Owners
3000GT/Stealth/GTO Forums
3000GT/Stealth International
3000GT/Stealth/GTO Event Pages
3S National Gathering
East Coast Gathering
Upper Mid-West Gathering
Blue Ridge Gathering