+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 50

Thread: Bilstein Struts and Ground Control coilovers

  1. #1
    Forum User supporter Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,076
    Blog Entries
    1
    Thanks
    126
    Thanked 43 Times in 38 Posts

    Post Bilstein Struts and Ground Control coilovers

    Bilstein shocks and Ground Control springs
    Front shocks reference F4-R36-5022-H0
    Rear shocks reference F4-B46-1742-H0

    I ran across this info and thought I'd share
    The original installation instructions were in spanish I tried my best to translate it. http://www.cardomain.com/ride/348632...-3000gt/page-3

    Cut the plate that supports the original spring cushion and mark where to cut the tube.



    After cutting the original tube then insert bilstein insert into the old strut housing, drill a hole (12 mm) at the base of the tube .



    Weld a steel ring of 5mm in diameter at the shock tube to support the Ground Control threaded pipe.



    these rubber parts were custom made because the ones that came with the GC kit were too small to use with the larger bilstein shafts



    the front struts

    Last edited by mb7050; 02-18-2012 at 08:48 AM.

  2. #2
    Forum User supporter Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,076
    Blog Entries
    1
    Thanks
    126
    Thanked 43 Times in 38 Posts
    front struts assembled







    To install the rear Bilstein struts, I had to make a piece of Teflon that would fit in the damper camber plate, cut in half, and place it below the original piece of GC


    Stock Wheel wells 27.50" front, 27.75" rear.
    After Wheel wells: 26.77" front 27.16 rear (68cm front 69cm rear)








    Usefull Links
    Shock and Strut Removal & Disassembly
    Stealth 316 - Shock & Strut Removal & Disassembly

    Ground Control Adjustable Height Springs Installation
    Stealth 316 - Ground Control Spring Installation

    Bilstein install (HD struts)
    Bilstein install (HD struts)
    Last edited by mb7050; 02-19-2012 at 08:37 AM.

  3. #3
    Forum User Not Verified
    supporter
    Feedback Score 0 Vantage's Avatar
    Join Date
    Sep 2010
    Owner Since

    Posts
    189
    Thanks
    13
    Thanked 18 Times in 14 Posts
    Nice find. Thanks for posting.


  4. #4
    Forum User supporter Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,076
    Blog Entries
    1
    Thanks
    126
    Thanked 43 Times in 38 Posts
    I found an old email... I had contacted him back in 2005 asking how he liked the ride.He does not recommend the mod and complains about the ride quality. Ends up selling the set-up
    Last edited by mb7050; 02-18-2012 at 12:22 PM.

  5. #5
    Forum User Not Verified
    supporter
    Feedback Score 0 Vantage's Avatar
    Join Date
    Sep 2010
    Owner Since

    Posts
    189
    Thanks
    13
    Thanked 18 Times in 14 Posts
    Well that's shitty..isn't that setup recommended by DG?

  6. The Following User Says Thank You to Vantage For This Useful Post:


  7. #6
    Twin Turbo verified
    supporter
    Feedback Score 5 (100%) GTOJOE's Avatar
    Join Date
    Sep 2010
    Owner Since
    2007

    Location
    Melbourne, Australia
    Posts
    1,658
    Thanks
    54
    Thanked 51 Times in 43 Posts
    That's the exact same thing DG recommends. I was planning on doing this at some point when funds were better.
    1990 JDM GTO TT, Aeromotive Stealth 340LPH pump, oohnoo fuel loop & rail adapters, Fuelab 515 FPR, Injector Dynamics 725cc, HKS Twin Spark DLI, K&N FIPK, Vi-PEC plug-in V44 EMS, Iridium plugs, NP 75amp fuel pump power kit, Turbo XS racing BOV, NP MBC, ARC SMIC's

    Build Thread


  8. #7
    Kevin's Care Audio GURU verified
    supporter
    Feedback Score 4 (100%) 2fnloud's Avatar
    Join Date
    Sep 2010
    Owner Since
    October 2009

    Location
    Ithaca, Mi.
    Posts
    1,175
    Thanks
    160
    Thanked 77 Times in 50 Posts
    Quote Originally Posted by mb7050 View Post
    I found an old email... I had contacted him back in 2005 asking how he liked the ride.He does not recommend the mod and complains about the ride quality. Ends up selling the set-up
    Quote Originally Posted by GTOJOE View Post
    That's the exact same thing DG recommends. I was planning on doing this at some point when funds were better.
    And you STILL want to do it?
    MODS
    Performance: Hennessey Stage 5 Tuning | AEM EMS Series 2 | AEM 4 Channel CDI | K&N F.I.P.K. Filter | HKS EVC I EBC | TD04 13G's | Centerforce Dual friction Clutch | Ninja Performances 70A Fuel Pump Hot wire | 3SX Poly Motor mounts
    Exhaust: HKS D-2 Cat-Back | Stillen D/P | 3SX Rear Pre-Cat Delete
    Suspension: Working E.C.S. | TEC Performance Rear Strut Bar
    Brakes: 3SX Stainless Steel Brake Lines
    Electrical: BigTyla Ground kit in 1/0GA
    Looks: 96' Replica banana spoiler | Window Tint | 99 turn signals | 3KGT2NV Allen head bolt kit | Seattlevr4 roller bearing STS
    Security: Viper 5902 | Remote start | Four 110Db piezo sirens (gives great headache) | Smart start | Glass sensor | Tilt sensor | Hatch release



    Things in red are yet to be installed

    Quote Originally Posted by dpartinvr4 View Post
    I grew up with LEGOS, wtf are instructions?
    ____________


  9. #8
    Twin Turbo verified
    supporter
    Feedback Score 5 (100%) GTOJOE's Avatar
    Join Date
    Sep 2010
    Owner Since
    2007

    Location
    Melbourne, Australia
    Posts
    1,658
    Thanks
    54
    Thanked 51 Times in 43 Posts
    not sure but I would tend to believe DG before anyone else when it comes to anything suspension related.

  10. #9
    Forum User supporter Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2000

    Posts
    1,076
    Blog Entries
    1
    Thanks
    126
    Thanked 43 Times in 38 Posts
    Miguel wasn't sure of the spring rates he was using so if one were to use softer springs it might be tolerable.

  11. #10
    Forum User Feedback Score 0
    Join Date
    Sep 2010
    Owner Since
    2009

    Location
    West MI
    Posts
    245
    Blog Entries
    1
    Thanks
    18
    Thanked 15 Times in 12 Posts
    iirc, the GC kit comes with like 600lb springs for the front... this is a lot stiffer than stock, of course the ride will be harsh... IMO helper springs should be ran with this set-up as well.

+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  • Resources
  • Events
  • Groups
  • Information
  • History
3000GT / Stealth / GTO Resources
3000GT / Stealth / GTO / Multi-site Classifieds
3000GT/Stealth/GTO Information and Resources
Team 3S
Stealth 316
3000GT / Stealth / GTO Information
The 3000GT/Stealth/GTO Web History Project
3000gt.com
3000GT / Stealth International WWWboard Archive